Open results from the Load Results page - BioPharma Finder Software - Open results from the Load Results page - BioPharma Finder Software - BioPharma Finder Software

Procedure

1. On the BioPharma Finder home page, select Intact Mass Analysis in the Experiment Types navigation pane.
2. Select the Load Results tab on the navigation bar.
3. The Load Results page opens and a table displays all of the previously saved intact mass analysis results, listed in chronological order of completion. You can sort and/or filter the table as needed.

4. 

5. The Load Results table displays the following information:
6. •Experiment name
7. •Processing method name
8. •Raw data file names/file paths
9. •Source spectra (deconvolution) method
10. •Deconvolution algorithm
11. •Number of chromatographic peaks and detected components in the analysis
12. •Time of completion and processing time
3. To open the results of an experiment, do one of the following:
1. Double-click the experiment row.
2. Select the experiment row and select Load Results on the command bar.
3. The Process and Review page opens by default. You can also select the Reporting tab to view the deconvolution report for the experiment and the Spectra Comparison tab to generate a mirror plot of two deconvolved spectra.